Auto All Aluminum Heat Exchanger for Peugeot 307

Auto All Aluminum Heat Exchanger for Peugeot 307

                      Micro channel parallel stream radiator specialist manufacturer

The condenser-a ingredient of the air conditioning circuit-is built-in into the engine cooling module, where it is utilised to great down and condense the compressed, gaseous refrigerant from the compressor. We generate brazed, flat tube condensers that provide large functionality in spite of their compact and lightweight style. They guarantee rapid cooling of the passenger compartment many thanks to the best possible matching of heat transfer and force drop on equally the coolant and the air side.

The condenser is a heat exchanger in a cell A/C system. Today, condensers are normally created of aluminum, but in the previous, some have been created of copper/brass. Condensers look really a lot like radiators, just a small thinner, and considering that they also count on air flowing via them, are normally situated in front of the radiator.
Like radiators and evaporators, condensers are also constructed as a collection of tubes with fins about them. its  job is to release heat. Far more specifically, to release the warmth the refrigerant absorbed whilst it was flowing by way of the evaporator, really a lot the same way the radiator releases the heat from motor coolant that the coolant absorbed while it was flowing by way of the motor. The refrigerant enters the condenser as a substantial-force vapor, but as it flows via the condenser and cools, it turns back again into a cooler substantial-stress liquid.

Item attributes
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Firm Advantage
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
2. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
4. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
six. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Long expression company is dependent on our trustworthy solutions, quick respond and our expert expertise to Car AC. We’ll grow to be your spouse, not just your provider.
one.CAD Drawing, and mould design and style base on your sample
2.Mould test and sample verification prior to mass production.
three.CZPTers of different transport lines.
four.competitive freight provides and one-end provider on clearing, transport troubles.

Q1. Are you a factory or buying and selling organization? A: we’re a self -possess manufacturing unit, we supply one-cease service for our buyers, from spare areas to condenser, from technical product sales to shipping and delivery and to following-product sales, so as to preserve the expense for shopper, control the top quality and lead time, offer the best solutions
Q2: The place is your manufacturing unit located? How can I check out there? A: Our factory is located in  HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What’s the creation time for new molds and mass production? A: seven-10 days to develop the new moulds, mass creation requires around twenty-25days for a single 20gp,25-30days for one 40hq, can process urgently if need to have.
This fall: What is the payment terms? A: Telegraphic Transfer (T/T) and Letter of Credit score (L/C).
Q5: Can you send me samples? A: Indeed, Samples are for free, and freight is on your side.


Auto All Aluminum Heat Exchanger for Peugeot 307